Contact Us

Contact us

Automatic Chicken Feet Skin Peeling Machine

  • Moq: 1 Set/Sets
  • Supply Ability: 100 Set/Sets Per Month
  • Loading Port: Shanghai Port/Qingdao Port
  • Application:
    This machine is specially used for peeling yellow skin of chicken feet.


Chicken feet peeling machine is designed and manufactured by our factory for all kinds of poultry processing refrigeration enterprises. This chicken feet peeler machine all adopt the stainless steel, with reliable performance, convenient use, low defect rates, high production efficiency, etc. ideal equipment for cold storage, food processing plants, foreign trade and other units. It is used to remove the yellow skin of chicken claw after blanching. The skin can be removed completely, clean and free of damage.
Chicken Feet Skin Peeling Machine
Basic Structure for Chicken feet skin peeling machine
This equipment is mainly composed of machine frame, cylinder body, dumping plate and transmission part, all of which are made of stainless steel. It is clean and beautiful. The rubber stick are specially used for food processing,poisonless and tasteless, clean and sanitary.
Working Principle of Chicken Feet Skin Peeler Machine
The device drives the wheel to run by a direct-coupled reducer, which makes the chicken claw move in a spiral between the sticks, so as to achieve the requirement of peeling.

Working Video of Chicken Paws Peeling Machine
Opearting Method for Chicken Paws Skin Peeling Machine
1. Firstly, according to the production requirements, the equipment shall be placed on a horizontal solid ground and fixed securely.
2. Turn on the power (380V) and observe whether there is any abnormality in the rotation of the motor. See that the running direction is correct (from top to bottom, it is clockwise direction).
3. When everything is running normally, you can start to work. Turn on the power supply, put the chicken claw (the amount should reach 2/3 of the volume of the cylinder), and turn on the washing switch at the same time to start the peeling work.
4. Finish peeling (generally peeling time is about 1 minute, specific time should be set according to actual situation control), close the flush switch, open the discharge flap (note: at this point discharge cover cannot be opened entirely, can only turn around 45 °), chicken feet are discharged from cylinder in the automatic flap.
5. After the end of the work, the waste inside and outside the machine should be cleaned and rinsed with water to facilitate the next work.
Chicken Paws Peeling Machine
Chicken feet are delicious and nutritious, large market potential, can make all kinds of taste, each size supermarkets have sales at present, in order to adapt to market demand, our company carried on the thorough research and technology development for the chicken feet peeling machine, now GELGOOG brand chicken feet peeling machine not only of good quality, high yield, technical content is very high, the chicken feet peeling rate is high and the chicken feet itself without any damage, is an economic and practical beautiful generous chicken feet processing equipment. 
GELGOOG chicken peeling machine is easy to operate, high production, clean peeling, stainless steel production, this equipment can remove chicken claw skin and nails very clean, and chicken claws will not have any damage. In addition, we can customize the equipment of large scale chicken claw peeling production line according to customers' demand. It is a domestic advanced chicken claw dehulling equipment. Stainless steel vertical chicken claw peeling equipment.

Technical Data

Model Capacity Motor
GGTP-50 10-15kg/time 1.5Kw/380v
GGTP-60 15-20kg/time 2.2kw/380v
GGTP-70 20-25kg/time 3kw/380v
GGTP-80 25-30kg/time 4Kw/380v
GGTP-90 30-40kg/time 5kw/380v

Send Inquiry to our factory

Leave Message

Number Change